Protection Level

Ballistic Shield Armoring protection level and ballistic specification. Ballistic Shield’s BR6 Level Armoring Solution, both opaque and transparent that meet or exceed the requirement s of the European CEN 1522/1523 and CEN 1063 standards to the level FB6 for opaque areas and BR6 for transparent areas.

Armored Vehicle Threat Level

The protective strength of a glazed shielding is rated based on the type of munitions, or threat level, it is capable of withstanding. There are 7 main standard threat levels: BR1-BR7 (also written as B1-B7), each corresponding to a different type of small arms fire. Additionally, there are two other threat levels (SG1 & SG2) corresponding to shotgun munitions.

To be given a particular rating, the glazing must stop the bullet for the specified number of strikes, with multiple strikes placed within 120mm of each other. The glazing should also be shatterproof and produce no spalls after each strike. Lastly, the classification levels are numbered in order of increasing protective strength. Thus any sample complying with the requirements of one class also complies with the requirements of previous classes. However, the SG (shotgun) classes do not necessarily comply with BR classes.

The precise test requirements and bullet types used are as follows: 

Euronorm Standard For  Security Glazing

ClassWeaponCaliberTypeWeight (g)Range (m)Velocity (m/s)Impact EnergyShots
BR1Handgun/Rifle.22 LRLB/RN2,6 ± 0,110,00 ± 0,5360 ± 10170 J3
BR2Handgun9×19mm ParabellumFJ/RN/SC8,0 ± 0,15,00 ± 0,5400 ± 10640 J3
BR3Handgun.357 MagnumFJ/CB/SC10,2 ± 0,15,00 ± 0,5430 ± 10940 J3
BR4Handgun.44 MagnumFJ/FN/SC15,6 ± 0,15,00 ± 0,5440 ± 101510 J3
BR5Rifle5.56×45mm NATOFJ/PB/SCP4,0 ± 0,110,00 ± 0,5950 ± 101800 J3
BR6Rifle7.62×51mm NATOFJ/PB/SC9,5 ± 0,110,00 ± 0,5830 ± 103270 J3
BR7Rifle7.62×51mm NATOFJ/PB/HC9,8 ± 0,110,00 ± 0,5820 ± 103290 J3
Scroll to Top